Built for the Techs, By a Tech!










 


NOC Tools tutorials

db checksHeadendHFC MAC idsTutorialsCisco faqs

CMTS-- ( cable modem termination system).

A cable modem termination system (CMTS) is a component that exchanges digital signals with cable modems on a cable network. A cable modem termination system is located at the local office of a cable television company.

A data service is delivered to a subscriber through channels in a coaxial cable or optical fiber cable to a cable modem installed externally or internally to a subscriber's computer or television set. One television channel is used for upstream signals from the cable modem to the CMTS, and another channel is used for downstream signals from the CMTS to the cable modem.

When a CMTS receives signals from a cable modem, it converts these signals into Internet Protocol (IP) packets, which are then sent to an IP router for transmission across the Internet. When a CMTS sends signals to a cable modem, it modulates the downstream signals for tranmission across the cable to the cable modem. All cable modems can receive from and send
signals to the CMTS but not to other cable modems on the line.


















Message from the Salty one:
If you have any Questions/comments /suggestions or you would like to contribute to NeoTech email me
SaltyNetGuru@NeoTechCC.org or AIM me at SaltyNetGuru.

Home | Email & Browsers | Windows 9X/2k | Windows XP | Macintosh | Linux/UNIX
Corporate Support | Downloads | Usb Adapters | Cable Modems | Routers & Hubs
NOC Tools | CC Forum | Helpfull Links | About Neo | Neo Thx & Credots | Message Board